Wireless Extender Setup in Easy Steps is the IP address of a private network range assigned to many routers worldwide. This number can be used to access the administrative features of your router, providing you with the ability to change settings, manage users, and more.

You may get to the Admin homepage by typing into your browser’s address bar or by clicking the LINK below

Login to your router at

The procedure to log in to your router by IP address, we do the following:

  1. Step 1: Make sure that the router/Modem you are using is currently turned on and that your computer is connected to WiFi or a wired network.
  2. Step 2: Enter this link into a Web browser (prefer Chrome) and press Enter.
  3. Step 3: A new window will appear asking you to enter your router’s username and password. Fill in the information and click OK to log in to the system.

If you are logging in for the first time but don’t know where to check your router’s name and password information, see the back of your router. You will see the name and password included with the IP address for users to easily track.

Connect wifi extender

How do you connect wifi extender to be able to login to Wifi repeater. Helps to check and reinstall the network system, avoid network congestion and many other problems, etc.

Don’t worry too much because here is the fix for you:

  1. Step 1: Open a Web browser and enter the IP address or
  2. Step 2: Connect Wifi signal “Wifi Repeater” in WLAN settings
  3. Step 3: Enter the default password “admin” and click “Submit.” Click “Repeat” to continue
  4. Step 4: Select the wireless SSID you want to extend
  5. Step 5: Change the SSID of the repeater and enter your router password => “Apply”
  6. Step 6: The repeater will be set up successfully within 30 seconds. Then you can go to the WLAN settings and connect to the new Wifi SSD.

How to Setup Wireless Extender?

Use the IP address or https://192.168.188.l to log into the router’s administration system easily. Set up the administration of your Wifi router and wireless repeater.

To set up Wireless Extender, you can watch detailed video instructions below: or Which IP address should I use? and are both IP addresses that represent the default gateway for most routers. This means that if you want to change your network settings or access your router’s admin panel, you’ll need to enter one of these addresses into your web browser’s address bar.

Keep in mind that is the more common of the two addresses, so if you can’t access your router using, try instead.

Open a web browser and enter the IP address to gain access to the router admin panel. You’ll be asked to provide a username and password. If your username and password have been changed, try to remember your new credentials. If that isn’t an option, reboot the router and log in using the default account.

More information about

The IP address is assigned to the primary router in a local area network (LAN). This address can be used to access the router’s settings, which is why it is also known as the router’s control panel or console. is also the default gateway for many routers, meaning that it is the address that your computer uses to access the internet when you are connected to a LAN. Even though you may not know much about this IP address, we have provided answers to some of the most often asked questions in the hopes of providing you with some useful information.

How to change IP address to

If you want to change your default IP address to another IP address. To do this, follow these steps:

  1. Step 1: Log in to the router’s admin page https://192.168.188.l/ enter the name and password.
  2. Step 2: Log in successfully, on the main homepage, go to “network settings” => “router settings”
  3. Step 3: Enter the new IP address you want to change.
  4. Step 4: Save to complete the change process.

How to change the range extenders IP from to

Just like how to change the IP address above, you follow the steps that we have outlined. When it comes to the step of entering a new IP address, you will enter the IP you want here to be to complete the change and save.

Why is isn’t working?

When accessing the IP address the cause that it does not work may be that you lose network connection, the IP address is not correct for the router. Or you’ve changed your login name and password that you don’t remember. Depending on the case to choose the right treatment direction.


Hopefully through the article, you can log into the router system by yourself according to the IP that we have instructed. As well as information related to this IP address for your reference.