– Login Admin & Configure Your Router

When knowing the IP address in use for the router. You can use it to log into the administrative system to help monitor and check related settings. So how exactly are the operations performed when you first do them? In this article, we will guide you through the most detailed steps so that you can successfully log in when you want to quickly access:

Instructions for login admin is the IP address of many routers, including Netgear and TP-Link Modems. If you are looking to log into the router’s Admin system to check or change its settings. The following content will guide you in detail to help you do this:

  1. Make sure the device you are using has an Internet connection and is connected via a router.
  2. Open up your Web browser be it Safari, Google Chrome, Mozilla Firefox or Microsoft Edge if that’s convenient for you.
  3. Paste the link into the address bar of your Web browser to access it. The system will lead to the login page.
  4. At this point, you proceed to enter the router’s username and password. The username and password information is usually located on the back of the router you can check.
  5. Logged in successfully. You should now be able to access the router’s administration system.

The above content is a guide for those who are accessing the router’s administration system for the first time. For those of you who have visited and changed your password and name information, but when you log in, you forget that information, what to do?

The fastest way is to restart the router so that the settings return to their original state. To reboot, you’ll be looking for a small reset button hidden on the back of the router. Press and hold that button for about 10-15 seconds with a paper clip or needle to return the settings to factory defaults. You will then be able to log in with the default credentials.

With, what can you do?

Once successfully accessed the router’s admin page http://192.168.12.l. We can install and configure it as follows:

1. Configure Your Router at

For information security, you can change your router username and password.To do this, go to the general settings => Choose a router password or a menu with a similar name => Change the password according to your wishes.

Similarly you do the same if you want to change the username. Then save it all.

Note that when changing your password and username, you should save it somewhere so that you can easily find it later.

2. Change Your Local IP Address

You can also change your local IP address from 192.168.12.l IP address to another IP address of your choice. To do this is similar to how you change the password information, the router’s username.Go to your router’s admin page. At the home page, you go to general settings or something similar. Select “Network Settings” and navigate to “Router Settings”.Proceed to enter the new IP address you want to change and save it.

3. Change your Wi-Fi access name or password

In addition, you can also change your Wifi network name and password. To do this:You go to the General Settings Menu => Select the wireless setting option => In the SSID section, enter the name or password of the Wifi network you want. Then save it all to finish. is a Public address or a private IP address? is a type of private IP address used for local networks that are not publicly accessible. Public IP addresses are routable on the Internet, while private IP addresses are used in LANs. is an example of a private IP address.

Final Thoughts

Thus, through the information that we have detailed above on how to log into the router’s IP address Surely you have also grasped the necessary information to be able to perform and manipulate it yourself. To do this is quite simple if you are careful and observe things!